- Products
- Commercial divers’ equipment
- Compasses and watches
- Defence divers’ equipment
- Diving instrumentation
- Electrical diving equipment
- Escape and abandonment
- Gas and fluid systems
- Medical and safety equipment
- Recompression chambers
- Submarine intervention
- Submarine rescue
- Swimmer delivery
- Services
- Consultancy and personnel
- Engineering services
- Rescue and support
- Testing services
- Training services
- Ancillary dive gear
- Commercial equipment and tools
- Commercial helmets, masks and SCUBA
- Commercial rebreathers
- Commercial surface supply
- Diver's suits and harnesses
- Contaminated water diving system
- BIBS manifold block
- Confined space rescue stretcher
- Divex back pressure regulator
- Divex interlock
- Diving bell survival kit
- DMAC 015 kits
- DMAS HyperSAT
- Hy-Fex hyperbaric fire extinguisher
- Hyperlite hyperbaric stretcher
- Oxygen kits
- Ultralite 2 BIBS mask
- DSAR rescue vehicles
- Launch and recovery systems
- Multi-role launch and recovery system
- Submarine rescue bell
- Client representatives
- Dive and ROV system audits
- Diving technical expertise
- Offshore personnel
- Rescue certification
- Commercial development courses
- Defence training courses
- Medical training courses
- Product specific courses
- JFD successfully undertakes simultaneous operation [SIMOPS]
- Safety first for deep sea divers
- Top BAE award for JFD
- JFD wins £193M Indian Navy submarine rescue contract
- Archive
Aquabeam LP-20 hyperbaric light
The LP-20 is a low profile hyperbaric light offering a high, well diffused output with maximum safety, easy servicing and choice of two operating voltages. Its designed specifically for installation within the limited confines of the SDC's and DDC's.
The lamphouse embodies a toughened, frosted lens, and is fitted with a relief valve to eliminate post compression explosion hazard. In the event of helium ingress into the bulb, its effect is minimised in the use of miniature, tungsten halogen capsules, i.e. small bulb - small cavity.
A heat-sink plate is available to increase the base area of the fixture for additional cooling, when it is not mounted directly to metalwork within the vessel.
| Volts | Watt | Order code |
| 12 | 20 |
LA107 |
| 24 | 20 |
LA108 |
Mounting holes: 6mm (0.236”) dia, 97mm (3.819”) between centres.
| Diameter | Height | Weight | |
| Basic fixture | 114mm (4.45") | 57.0mm (2.24") | 0.66kg (1.45lbs) |
| With extended bezel | 114mm (4.45") | 79.5mm (3.13") | 0.73kg (1.60lbs) |
| With heat-sink place | 152mm (6.00") | 60.7mm (2.39") | 0.91kg (2.00lbs) |
| With EB and HS | 152mm (6.00") | 83.2mm (3.27") | 0.98kg (2.16lbs) |
| Supply voltage |
12/24Vdc |
|
Current consumption |
1.7A (12V), 0.85A (24V) |
|
Typical luminous flux |
300lm |
|
Typical colour temperature |
2700K |
|
Lamp life |
2000 hours |
| Item | Order code |
| Aquabeam LP-20 c/w cable tail |
LA095 |
| Aquabeam LP-20 low profile hyperbaric light c/w switch and RMG 3MP connector |
LA096 |
| Aquabeam LP-20 low profile hyperbaric light c/w switch and RMG 3MP connector, extended bezel |
LA096EB |
| Aquabeam LP-20 low profile hyperbaric light c/w RMG 3MP connector |
LA098 |
| Aquabeam LP-20 low profile hyperbaric light c/w extended bezel |
LA098EB |
| Aquabeam LP-20 low profile hyperbaric light c/w RMG 2MP connector |
LA098AA |
| Type | Document | Download |
| Datasheet | Aquabeam LP-20 hyperbaric light | |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w cable tail | |
| Drawing | Aquabeam LP-20 hyperbaric light c/w switch and connector | LA96S1 R0 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w RMG 3MP connector | LA98S1 R2 |
| Drawing | Aquabeam LP-20 hyperbaric light c/w extended bezel, switch and connector assy | LA9652S1 R0 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w RMG 2MP connector | LA9811S1 R0 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w extended bezel | LA9852S1 R2 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w frosted dome, switch and 30ft cable tail | LA9862S1 R0 |
| Volts | Watt | Order code |
| 12 | 20 |
LA107 |
| 24 | 20 |
LA108 |
Mounting holes: 6mm (0.236”) dia, 97mm (3.819”) between centres.
| Diameter | Height | Weight | |
| Basic fixture | 114mm (4.45") | 57.0mm (2.24") | 0.66kg (1.45lbs) |
| With extended bezel | 114mm (4.45") | 79.5mm (3.13") | 0.73kg (1.60lbs) |
| With heat-sink place | 152mm (6.00") | 60.7mm (2.39") | 0.91kg (2.00lbs) |
| With EB and HS | 152mm (6.00") | 83.2mm (3.27") | 0.98kg (2.16lbs) |
| Supply voltage |
12/24Vdc |
|
Current consumption |
1.7A (12V), 0.85A (24V) |
|
Typical luminous flux |
300lm |
|
Typical colour temperature |
2700K |
|
Lamp life |
2000 hours |
| Item | Order code |
| Aquabeam LP-20 c/w cable tail |
LA095 |
| Aquabeam LP-20 low profile hyperbaric light c/w switch and RMG 3MP connector |
LA096 |
| Aquabeam LP-20 low profile hyperbaric light c/w switch and RMG 3MP connector, extended bezel |
LA096EB |
| Aquabeam LP-20 low profile hyperbaric light c/w RMG 3MP connector |
LA098 |
| Aquabeam LP-20 low profile hyperbaric light c/w extended bezel |
LA098EB |
| Aquabeam LP-20 low profile hyperbaric light c/w RMG 2MP connector |
LA098AA |
| Type | Document | Download |
| Datasheet | Aquabeam LP-20 hyperbaric light | |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w cable tail | |
| Drawing | Aquabeam LP-20 hyperbaric light c/w switch and connector | LA96S1 R0 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w RMG 3MP connector | LA98S1 R2 |
| Drawing | Aquabeam LP-20 hyperbaric light c/w extended bezel, switch and connector assy | LA9652S1 R0 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w RMG 2MP connector | LA9811S1 R0 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w extended bezel | LA9852S1 R2 |
| Drawing | Aquabeam LP-20 hyperbaric light assembly c/w frosted dome, switch and 30ft cable tail | LA9862S1 R0 |
