- Products
- Commercial divers’ equipment
- Compasses and watches
- Defence divers’ equipment
- Diving instrumentation
- Electrical diving equipment
- Escape and abandonment
- Gas and fluid systems
- Medical and safety equipment
- Recompression chambers
- Submarine intervention
- Submarine rescue
- Tactical Diving Vehicles
- Ansti testing equipment
- Services
- Consultancy and personnel
- Engineering services
- Rescue and support
- Testing services
- Training services
- Ancillary dive gear
- Commercial equipment and tools
- Commercial helmets, masks and SCUBA
- Commercial rebreathers
- Commercial surface supply
- Diver's suits and harnesses
- Contaminated water diving system
- BIBS manifold block
- Divex back pressure regulator
- Divex interlock
- Hy-Fex hyperbaric fire extinguisher
- Hyperbaric flame detector
- Hyperlite hyperbaric stretcher
- Oxygen kits
- Ultralite 2 BIBS mask
- InVicto ventilator system
- DSAR rescue vehicles
- Launch and recovery systems
- Multi-role launch and recovery system
- Submarine rescue bell
- Client representatives
- Dive and ROV system audits
- Diving technical expertise
- Offshore personnel
- Rescue certification
- Remote audit solution
- Altitude testing and trials
- Hyperbaric welding
- Pressure testing and trials
- Test tank
- Breathing laboratory
- Commercial development courses
- Defence training courses
- Medical training courses
- Product specific courses
- Online training courses
- Classroom training FAQ
- Case Study: Roger Chapman Pisces III
- Case Study: HMS Edinburgh
- ANSTI CSTF
- Akademik Tofiq Ismayilov (ATI)
- Archive
- JFD mobilises NSRS during international exercise, Dynamic Monarch
- JFD expands long term partnership with Indian Navy strengthening underwater capabilities
- James Fisher's Tony Tang Kok Yong qualifies as first Singaporean Submarine Rescue Vehicle Pilot 1
- JFD welcomes Peter Laughton MBE as Head of Military Diving
- Archive
- Divulged - Winter 2017
- Divulged - Summer 2017
- Divulged - Winter 2016
- Divulged - Summer 2018
- Divulged - Winter 2018
- Divulged - Winter 2019
- Divulged 2021 Edition 1
- UDT 2019
- Visit JFD at UI 2016
- Visit us at OTC Asia 2018
- Visit JFD on stand 338 at Underwater Intervention 2018
- JFD is exhibiting at ONS 2018
- JFD is exhibiting at OSEA 2018
- Join JFD at IDEX 2019
- See JFD at Subsea Expo 2019
- JFD takes on BALT Military Expo
- JFD presents complete defence offering at UDT 2018 in Glasgow
- Join JFD at ADIPEC 2018
- Visit JFD at Pacific 2017
- Visit JFD at MSPO 2018 in Poland
- JFD presenting at UDT conference
- JFD is exhibiting alongside James Fisher Nigeria at NOG
- JFD exhibiting at UDT 2016
- Visit JFD at Underwater Intervention 2019
- JFD is participating at Underwater Defence & Security
- See JFD at this year’s IMCA Annual Seminar
- JFD is exhibiting at LAAD Defence & Security 2019
- JFD LEXMAR is exhibiting at OSEA 2016
- JFD is exhibiting at Subsea Expo 2017
- Visit JFD at Indo Defence 2018 Expo and Forum
- Visit JFD on stand 403 at Underwater Intervention 2017
- JFD exhibiting at Europoltech
- JFD at IMDEX
- Visit JFD at UDT 2017
- Visit JFD at DSEI 2017
- JFD is exhibiting at OTC 2018
- JFD is exhibiting at Subsea EXPO 2018
- JFD is exhibiting at Sea Air Space 2018
- Visit JFD at DSA 2018
- See JFD at Defexpo 2018
- JFD is exhibiting at ADIPEC 2017
- Come see JFD at DSEI!
- See JFD at IMDEX Asia 2019
- JFD is at Oil & Gas Asia 2019
- Experience DSEI with JFD
- See JFD's full defence capability at MSPO 2019
- JFD is exhibiting at this year's Offshore Europe
- Visit us on stand 2S16 at Pacific
- See JFD at ADIPEC on stand 13572
- Explore our commercial capabilities at Bergen International Diving Seminar
- JFD showcasing commercial and defence capabilities at Underwater Intervention
- JFD exhibiting alongside James Fisher Offshore at Subsea Expo
- Visit our stand at DSEI 2021!
- Join JFD at Subsea Expo 2022
- Visit JFD Australia at Indo Pacific 2022
- JFD North America is exhibiting at SOFIC 2022
- Experience CNE 2022 with JFD
- Discover JFD at UDT 2022
- Join JFD at GSOF Symposium Europe this October
Kirby Morgan M-48 MOD-1 full face mask
The M-48 MOD-1 is the next generation of the popular original M-48 mask.
It still features the unique 2-cavity design. This allows the lower pod to be removed while topside to conserve air, and allows normal speech while diving. It may also be used with a variety of different communication systems.
The lower pod is also removable under water to allow making gas switches, and to share gas in the event of an emergency. The evolution of the mask has given way to a dramatic increase in visibility, an improved buckle system, 5 leg straps, a mechanical equalizing device, and a variety of options for mounting external components, (lights, cameras etc.).
All of the components have been strengthened to bring this mask to a commercial level of ruggedness you will not find in ANY other lightweight full face mask. Future innovations for the mask are underway and because this mask has many available mounting options, it will be able to accept new components by Kirby Morgan, thus making it truly MODULAR.
| Kirby Morgan M-48 MOD-1 Full Face Mask | Jaw Frame | Mount Tabs | Nose Pinch | Plastic / Metal Buckles | Threaded inserts | Twin Lens | Nose block | Rapid change modular communications systems | Side block | Silicone oral nasal mask | Stainless steel shell | Whisker wings |
|
The mask should only be used for surface-supplied diving by divers trained and qualified in surface-supplied techniques and procedures. A fully functional emergency gas supply system and body harness must always be used when diving the Mod-1 or any of the KMDSI full-face masks models in the surface-supplied mode. When using this mask in countries that conform to CE standards the mask must only be used with components that have been CE certified. The maximum recommended recreational diving depth for the Mod-1 with open circuit scuba is 130 FSW (39 msw). |
High Performance/Impact Engineering Thermoplastic frame for lasting durability. |
Additional mounting tabs for mounting cameras and lights |
Breathing Equalizer |
Improved buckle system adjusts 5 leg straps |
For future product attachment or mounting |
Tempered glass for increased visibility |
Nose Block Device allows the diver to block the nose to equalize ears. |
Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection. |
Multi use side block has additional ports built in to provide controlled air flow, if needed. The stainless steel sideblock has a built in EGS. |
Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex. |
After x-ray inspection, each 316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite® or similar type cleaning pad. |
Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise. |
| M-48 MOD-1 with Balanced Scuba Regulator | M-48 MOD-1 with SCUBA Pod Assembly | M-48 MOD-1 Mask, No POD |
|
|
|
|
| Item | Kirby Morgan® order code |
| M-48 MOD-1 with Balanced Scuba Regulator | 805 - 175 with 200 - 130 |
| M-48 MOD-1 with SCUBA Pod Assembly | 805 - 175 with 805 - 015 |
| M-48 MOD-1 Mask, No POD | 805 - 175 |
| SCUBA Pod Assy, w/ Balanced Scuba Regulator | 200 - 130 |
| Type | Document | Download |
| Datasheet | Kirby Morgan® M-48 MOD-1 Full Face Mask |
| Kirby Morgan M-48 MOD-1 Full Face Mask | Jaw Frame | Mount Tabs | Nose Pinch | Plastic / Metal Buckles | Threaded inserts | Twin Lens | Nose block | Rapid change modular communications systems | Side block | Silicone oral nasal mask | Stainless steel shell | Whisker wings |
|
The mask should only be used for surface-supplied diving by divers trained and qualified in surface-supplied techniques and procedures. A fully functional emergency gas supply system and body harness must always be used when diving the Mod-1 or any of the KMDSI full-face masks models in the surface-supplied mode. When using this mask in countries that conform to CE standards the mask must only be used with components that have been CE certified. The maximum recommended recreational diving depth for the Mod-1 with open circuit scuba is 130 FSW (39 msw). |
High Performance/Impact Engineering Thermoplastic frame for lasting durability. |
Additional mounting tabs for mounting cameras and lights |
Breathing Equalizer |
Improved buckle system adjusts 5 leg straps |
For future product attachment or mounting |
Tempered glass for increased visibility |
Nose Block Device allows the diver to block the nose to equalize ears. |
Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection. |
Multi use side block has additional ports built in to provide controlled air flow, if needed. The stainless steel sideblock has a built in EGS. |
Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex. |
After x-ray inspection, each 316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite® or similar type cleaning pad. |
Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise. |
| M-48 MOD-1 with Balanced Scuba Regulator | M-48 MOD-1 with SCUBA Pod Assembly | M-48 MOD-1 Mask, No POD |
|
|
|
|
| Item | Kirby Morgan® order code |
| M-48 MOD-1 with Balanced Scuba Regulator | 805 - 175 with 200 - 130 |
| M-48 MOD-1 with SCUBA Pod Assembly | 805 - 175 with 805 - 015 |
| M-48 MOD-1 Mask, No POD | 805 - 175 |
| SCUBA Pod Assy, w/ Balanced Scuba Regulator | 200 - 130 |
| Type | Document | Download |
| Datasheet | Kirby Morgan® M-48 MOD-1 Full Face Mask |
