Low Profile Hyperbaric Light

Lower operating temperatures will be achieved when the basic fixture is mounted directly onto any conductive mass exceeding the dimensions of the heat-sink plate. Each fixture is hydrostatically tested to 75 Bar (absolute). Greater test pressures will be applied on request.

The Aquabeam LED LP-20 is a low profile hyperbaric light fixture designed specifically for installation within the limited confines of the SDC’s and DDC’s.
The LED LP-20 light offers a high, well diffused output with maximum safety and easy servicing. The housing embodiesa toughened, frosted lens, and is fitted with a relief valve for pressure equalisation.
A heat-sink plate is available to increase the base area of the fixture for additional cooling, when it is not mounted directly to metalwork within the vessel.
When the fixture is installed as an individual bunk light, adjacent bunk dazzle may be eliminated by the fitting of an extended bezel. The bezel extension also serves to prevent accidental blanketing of the lens and consequential overheating.
The connector is the Divex RMG-3-MP with stainless steel locking sleeve. In free air at 22OC ambient, the basic fixture operates at 48OC and less than 43OC with the heat-sink plate.