JFD's Divex chamber conditioning unit CCU-06 has been designed for use in hyperbaric environments, both air and heliox, for temperature and humidity control.

It is rated to depths of 500 MSW and form part of the extensive range of Divex hyperbaric environment conditioning equipment. The CCU-06 has been specifically designed for heating, cooling and dehumidification.

The unit may be mounted in any convenient space within the chamber where an even flow of circulating gas can be ensured, usually below chamber bunks. Flexible ducting may be added to the blower outlet to ensure adequate circulation, or to direct circulation into the required areas.

Interconnecting fluid supply pipework, shell stop valves, chamber temperature/humidity monitoring equipment and fluid temperature control systems, are not specified as these will tend to be unique for each application. The end-user should ensure these items are provided and installed to acceptable standards.

Further Information

  • Coil assembly: heating and cooling coils fitted to common end plates forming a single coil assembly, mounted inside the heat exchanger box. Chamber atmosphere first passes through the cooling coil and then through the heating coil.
  • Heat exchanger box: encloses heat exchanger assembly and includes hot and cold water connection ports and condensation drain ports for the CCU-06. Mounted onto plenum or duct assembly.
  • Plenum or air duct assembly: positioned between the heat exchanger assembly and the blower assembly and includes mounting brackets.
  • Blower assembly: produces the flow of breathing gas and includes electric motor.
Electrical requirements 24 VDC, ± 2A
Air volume moved Up to 2m3/min
Chilling/heating capacity*

500 W @ 0 msw

4000 W @ 100 msw

8000 W @ 300 msw

Heliox

Condensation removal rate 0.2 litres/min
Cooling/heating liquid 25 litres
Requirements Cold @ 2C, Hot @ 60C
Coil construction Copper fins, stainless steel tubes and end plates
Housing and blower assembly Gr. 316 stainless steel
Heating/chilling fluid ports 1/2" NPT (F)
Condensate drain ports 1/2" NPT (F) X 4 off
Coil external pressure test 65 bar (hydro)
Assembly leak test 50 bar (helium)
Mounting orientation Radiator fin plates in vertical plane for condensate drainage
Document Document type Download
Kinergetics chamber conditioning unit CCU-06 Datasheet KI-MDS-570 R1
Chamber conditioning unit, CCU-06, Part number: KI40053 Operation and maintenance EC-OM-6847 R3
Kinergetics chamber conditioning unit CCU-06, axial blower 45 bar Drawing KI40053S1 R1
Item Order code
Chamber conditioning unit CCU-06, standard KI40053
Chamber conditioning unit CCU-06, Lloyds approved KI40053LYD
Chamber conditioning unit CCU-06, DNV approved KI40053DNV
Chamber conditioning unit CCU-06, ABS approved KI40053ABS
James Fisher is a global supplier of trusted engineering services across the industries we serve, with an unrivalled ability to develop innovative solutions that meet the constantly developing needs of our customers operating in challenging environments.
Contact us for more information